Our brief was to supply and install a new Internal Stair & Balcony extension. This stainless steel glazed ballustrade was to allow for strings and supports as per the engineer’s sketch. 19mm toughened polished glass was used on 4nr ø70mm stainless steel point fixing per panel of glass.

These War Memorial totems have a stainless steel structure made from grade 304, including a 2mm S/S grade 316 cladding. Marble tablets are incorporated into the design.

For the Free Standing Stairs, we combined 19mm toughened clear glass with stainless steel clamping plates, added timber cladding and finished with lacquer on the underside of the treads. The copper cladding is made from flat and curved 2mm gauge aluminium, with 7mm shadow gaps on all panel joints. The panels were secret fixed to metal studding.

Balcony Guard Rails: stainless steel handrail fixed to the top of guardrail to the structural engineer’s detail. Laminated tempered glass panel fixed between the uprights of the stainless steel balconies using continuous neoprene gasket surround on both sides of the glass, fixed with 20mm x 20mm angle cleats. All steelwork was polyester powder coated.

Roof terrace, galvanised and powder-coated stainless steel Swing Set using nylon ropes, swaging and powder coated aluminium folded seats. Bolt-together, removable, tubular construction. Extra ties at high level ensure safe operation.

Stainless steel Handrail and hardwood Balustrade system complete with, and including, S/S vertical plate cut to profile, 45mm diameter solid hardwood handrail to both sides, S/S base plates. Complete with all required fixings, fittings, welds, seals, gaskets, fixing bolts and brackets.

Stainless steel box section Guardrails, including a drinks shelf and stepped, curved 50mm diameter handrails. Grade 304 stainless steel restaurant and bar equipment, incorporated timber shelves with cover plates at the base of the posts.

Painted atrium feature, stainless steel Staircase for a blue chip client. These unique stairs were designed with a stainless steel lit handrail and acoustic perforated panelling with sound deadening material. The selected finish was toughened glass panels for each riser with an LED display installed behind.

The lacobel glass is bonded to a full sheet of 1.5mm thick galvanised steel and is fixed to the lift wall by backing channels which have a secret lift-off mechanism, giving the glass the impression that it is suspended (floating) without fixings. Both the handrail and the brackets are removable to allow glass replacement, if necessary.

PRO Stainless were tasked with designing, manufacturing and installing stainless steel Lighting Masts and War Memorial totems on the final phase of civil engineering works to complete King’s Cross Square. The lighting columns were to be an integral and important part of the redevelopment of the square.

Briefed to build a structural glass floor, we used a double glazed unit made up of 32mm laminated structural glass, with the top layer fritted for non-slip properties. We added steel spacers, contraflam and pyranova glass to provide the required fire rating for a stainless steel bridge.

PRO Stainless provided a number of bespoke features for this atrium garden. A bridge support structure over the water feature was built with specialist ekki timber and bespoke anodised aluminium planter boxes in various RAL colours. The street furniture and benches were fabricated from 316 grade stainless steel, as was the balustrade for the courtyard stairs.